It is an outdoor motion detector, which uses two independent passive infrared sensors. Both sensors must be triggered at the same time for the detector to cause an alarm. Pyro quad technology is used to perform accurate and reliable motion detection. Programmable options include a variable pulse counter and a selection of three detection ranges.
Controladores BACNet, BAC-5901C y BAC-5901CE
BAC-5900 series, programmable, general purpose, controllers are designed to control building systems and HVAC equipment. The integrated alarming, scheduling, and trending enable these BACnet Advanced Application Controllers to be powerful edge devices for the modern smart building ecosystem.
The controllers feature simple, menu-driven setup choices using an STE-9000 series digital sensor, which can be installed permanently as the room sensor or used temporarily as a technician’s service tool.
Alternately, quick configuration of controller properties can be done using NFC (Near Field Communication) from a smart phone or tablet (using KMC Connect Lite app) while the controller is unpowered.
To meet the most demanding building automation custom requirements, these controllers are also fully programmable. Custom configuration and programming, with wizards for application programming selection/configuration, are enabled by KMC Connect software and the KMC Converge app for NiagaraAX Workbench.
KMC Converge and TotalControl software additionally provide the capability of creating custom graphical web pages (hosted on a remote web server) to use as a custom user-interface for the controllers.
They can be used with the following types of equipment: air handling units, boilers, chillers, pumps, cooling towers, roof top units, heat pump units, fan coil units, unit ventilators, and other HVAC and building automation system equipment.
Each BAC-5901 has 8 universal inputs and 8 universal outputs, which can be expanded up to 40 inputs and 40 outputs using CAN-5900 Series I/O Expansion Modules.
BAC-5901s can be used to control the following types of equipment: air handling units, boilers, chillers, pumps, cooling towers, roof top units, heat pump units, fan coil units, unit ventilators, and other HVAC and building automation system equipment.
Sensores de Temperatura de la Serie STE-1400
STE-1400 Series 10,000 ohm, Type III thermistor, temperature sensors are available in different housings for surface, duct, duct averaging, immersion, strap-on, and outside air applications. All probes are constructed to provide good heat transfer and fast response. The averaging sensors are available in both plenum-rated cable or with a copper probe.
Router modelo BAC-5051E
The KMC Controls BAC-5051E is a multi-port BACnet router. This compact router is powerful enough for heavy network traffic and small enough to use as a control technician’s service tool.
Install the BAC-5051E for BACnet IP, Ethernet, and MS/TP routing. The IP routing is fully compliant with BACnet Standard 134-2012, Annex J.
Configure the BAC-5051E using only an Internet browser. No special software to learn or load.
Meets the BACnet Testing Labs B-RTR profile for a BACnet router.
Rociadores
Sprinklers are installed according to the requested specifications for each specific case. All of them have UL/FM seals.
There are many types of sprinklers: Mounted, hanging, for the walls, hidden or specialized for storage. Of fast or standard response, for a specific temperature range and K factor requested.
Termination painted bronze, chrome or white with embellishing ring.
Bocas de incendio equipadas
The equipped fire hydrants are composed of a red metal enclosure with a glass door, a 25mm or 45mm globe valve, one or two hose sections, a kit of Storz fittings, and a multi-task or direct jet pointer.
Accesorios para caños ranurados
The grooved system provides great advantages, making the field work more agile, as pieces can be quickly rotated, added, changed or eliminated.
TuberĂa Hierro Negro
The piping is made of Black Iron cell 20, using a grooved by cold embossing system, with grooved type UL/FM parts and accessories.
The threaded pipes, are made of Black Iron cell 40 with threaded parts of equivalent properties, according to NFPA 13.
The entire piping is painted with an anti-oxide base and a vermillion paint or a color of the client’s choice.
Panel Central Análogico Direccionable Serie S3
Projected for small and medium applications, the Gamewell-S3 Series addressable analog central panel provides a better solution to the market’s needs, with all the characteristics into the same equipment, with greater reliability and performance than any other of its type.
The basic control panel provides a loop of 126 addresses expandable up to 2 .
Sistema de supresiĂłn de incendios por agente limpio
The clean agent fire suspension system from Janus Fire Systems uses FM-200® or Novec™ 1230 as extinguishing agent.
FM‑200® is a colorless, non toxic gas, ideal for the protection of great value goods in zones that tend to be occupied by people, in places where the cleaning of other agents is problematic (other extinguishing agents characteristic residues), whenever there is a restricted place for the storage of a fire extinguishing agent, or whenever a non electric conductor agent is needed.
Novec 1230 is a transparent, colourless, and almost odorless liquid, ideal for the protection of great value goods in zones that tend to be occupied, in places where the cleaning of other agents is problematic (other extinguishing agents characteristic residues), whenever there is a restricted place for the storage of a fire extinguishing agent, or whenever a non electric conductor agent is needed.
The Novec 1230 (FK-5-1-12) liquid is composed by carbon, fluorine and oxygen. The primary extinguishing mechanism of the Novec 1230 liquid is the abortion of heat, with a secondary chemist input through the thermal decomposition of the Novec 1230 liquid by the flames. The Novec 1230 liquid does not leave any residues and it is safe to use in occupied areas.
The NOvec 1230 liquid is a highly fluorinated ketone, that does not contain either chlorine or bromine. Thus, the PAO (Potencial de Agotamiento del Ozono) of the Novec 1230 liquid is zero, so it does not affect the stratospheric ozone. The Novec 1230 liquid has a lifetime on the atmosphere of only 0.014 years.
MĂłdulos de expansiĂłn I/O, CAN-5901
These input/output expansion modules are designed for use with KMC BAC-5900 series controllers. Multiple CAN-5901s can be connected to a controller via a CAN bus. Each CAN-5901 supports up to eight universal inputs and eight universal outputs. For example, a BAC-5901 with four connected CAN-5901s could access up to (internal and external) 40 inputs and 40 outputs connected via terminal blocks.
Sensor TĂ©rmico analĂłgico direccionable
The thermal detector has an open case that allows air to enter, for optimal contact between the temperature sensor and the environment.
A measure of temperature is transmitted as an output voltage proportional to the air temperature. The analog signal is then processed and digitally transmitted to the Fire Control Panel.
AppStat
The BAC-4000 Series is an easily and efficiently thermostat to control fan coil units, rooftop units, or heat pump units. “AppStat” refers to a new series of BACnet communicating thermostats from KMC Controls, factory programmed. Each model in the series combines a BACnet applications specific controller and sensor options into an attractive, space-mounted device.
The visual appeal of AppStat is accented by the overall design, a color LCD screen, and soft-touch buttons. Through the screen and buttons, installers and users can completely configure the devices and access various menu options.
Various feature options are available for each of the included applications. Such features include modulating versus on/off operation of associated components, such as valves and fans, as well as control for components such as economizers. Sensor options, beyond standard temperature sensing, include humidity and motion/occupancy.
Sensor de temperatura ambiente: Serie STE-6000
These compact, stylish, and economical room temperature sensors and transmitters are designed for use in a KMDigital and BACnet building automation Systems.
Sensor de temperatura ambiente con display, Serie STE-9000
The Conquest STE-9000 series NetSensors consists of multiple models with humidity, motion, and CO2 sensor options. They are available in white or light almond.
Válvulas de Esfera Lineales
VEB-43 (formerly VEP-45) series, two-way and VEB-46 (formerly VEP-436) series, three-way NPT, ball valves are designed for the control of hot or chilled water in HVAC applications. Valves range in size from 1/2 to 3 inches feature an optimizing insert, which reduces the Cv and characterizes the ball opening for equal percentage flow characteristics. These valves include a field-repairable blowout- proof stem and leak-proof shut-of. The reduced torque seals and O-rings eliminate the need for high torque actuators and actuators require only low torque of the MEP-4000 series valves for all sizes. The standard connection is NPT optionally have to weld or BSP. It sizes ½” to 2”and has several Cv for each gauge, according to the model of the insert. The actuators may be modulating or floating.
Detector de DiĂłxido de Carbono (CO2) Serie SAE-1000
These CO2 detectors sense and transmit carbon dioxide levels, for use in closed rooms occupied by people to ensure indoor adequate air quality while minimizing the energy costs of conditioning outside air.
It uses a NDIR (Non-Dispersive Infrared) sensor, which includes a microprocessor that adjusts the measure related to daily and historical trends. Output signal: 4 – 20 mA or 0 – 5 VDC proportional to the measured and adjusted value.
Detector de MonĂłxido de Carbono (CO) Serie SAE-1100
These CO detectors sense and transmit carbon monoxide levels, for use in any industrial or commercial indoor environÂment where accurate CO detection is required, i.e. parking.
Such information is crucial to demand controlled ventilation that ensures adequate indoor air quality while minimizing the energy costs of conditioning outside air. Uses an electrochemical sensor, Output signal: 4 – 20 mA, 0 – 5 VDC or 0 a 10 VDC proportional to the measured value.
FlexStat, Serie BAC-10000
IN1 Temperature sensor
3 programmable inputs; digital – analog:
IN5 Humidity sensor (optional)
IN6 Motion sensor (optional)
IN7 CO2 (prevision)
9 programmable outputs; digital – analog, or relay depending on the model
8 standard control blocks P, PI, PID
10 Basic programming blocks
LCD display
Controlador unitario BACnet BAC-9301C y BAC-9301CE
BAC-9300 series controllers are designed to operate unitary and terminal equipment. The integrated alarming, scheduling, and trending enable these BACnet Advanced Application Controllers to be powerful edge devices for the modern smart building ecosystem.
The factory-supplied programming covers common unitary applications. The controllers feature simple, menu-driven setup choices using an STE-9000 series digital sensor, which can be installed permanently as the room sensor or used temporarily as a technician’s service tool.
Alternately, quick configuration of controller properties can be done using NFC (Near Field Communication) from a smart phone or tablet (using KMC Connect Lite app) while the controller is unpowered.
To meet the most demanding building automation custom requirements, these controllers are also fully programmable. Custom configuration and programming, with wizards for application programming selection/configuration, are enabled by KMC Connect software and the KMC Converge app for Niagara Workbench.
KMC Converge and TotalControl software additionally provide the capability of creating custom graphical web pages (hosted on a remote web server) to use as a custom user-interface for the controllers.
Can be used with the following types of unitary equipment: Air handling units (AHU), constant air volume (CAV) with external actuator, fan coil units (FCU), heat pump units (HPU), roof top units (RTU), unit ventilators, and variable air volume (VAV) with external actuator.
Controlador/actuador de caja VAV programable con comunicaciĂłn BACnet y sensor de flujo de aire. Modelo BAC-9001
BAC-9000 series controller-actuators are designed to operate VAV (Variable Air Volume) terminal units. The integrated alarming, scheduling, and trending enable these BACnet Advanced Application Controllers to be powerful edge devices for the modern smart building ecosystem.
With integrated actuators, internal air pressure sensors, and other powerful features, they are ideal for new installations and upgrades of less-efficient equipment. They easily mount to terminal boxes by securing a “V” clamp on the shaft and securing a single-screw anti-rotation bracket.
The factory-supplied programming covers common VAV applications. The controllers feature simple, menu-driven setup choices using an STE-9000 series digital sensor, which can be installed permanently as the room sensor or used temporarily as a technician’s service tool.
Alternately, quick configuration of controller properties can be done using NFC (Near Field Communication) from a smart phone or tablet (using KMC Connect Lite app) while the controller is unpowered.
To meet the most demanding building automation custom requirements, these controllers are also fully programmable. Custom configuration and programming, with wizards for application programming selection/configuration, are enabled by KMC Connect software and the KMC Converge app for NiagaraAX Workbench.
KMC Converge and TotalControl software additionally provide the capability of creating custom graphical web pages (hosted on a remote web server) to use as a custom user-interface for the controllers.
Application options include: pressure independent or dependent VAV; cooling only and with changeover; staged, modulated, floating, or time-proportional reheat; series or parallel fan control; dual duct (with TSP-8003 actuators); and CAV (Constant Air Volume). For installations with a BACnet building automation system, these easily integrated controllers signal demands for higher static duct pressure, cooler or warmer supply air, and other diagnostics for AHU optimization.
Sistema Integrado de Edificios
This is a building management system that can be configured meeting specific and individual user’s requirements.
The BIS has a wide range of functions and features that make it work with Fire Detection as well as for the integration with all the electronic systems in high tech buildings.
Centrales E3
The E3 Gamewell Series is a sophisticated fire protection system, also suitable to the customer’s needs.
Its modular design allows flexibility for almost any requirement, independent from the size.
FocalPoint
This software controls and monitors in a graphic way every event in the fire system, in the panel and all its devices.
The FocalPoint Gateway is a powerful interface that provides the capacity to monitor multiple networks installed in remote locations. The gateway interfaces with the following standalone and network product lines via the panel´s RS-232 port
Sensor de humo fotoeléctrico analógico direccionable
The slim-designed photoelectric analog addressable smoke sensor, transmits its address and analog values from the sensor’s chamber  to the Fire Control Panel for them to be analyzed. Inside of the sensor’s chamber there is a light pulse emitting LED and a photodiode. When smoke enters the chamber, the light pulse from the LED is diffused, and this is detected by the photodiode.
The sensor has a red LED, that flashes briefly when the device is sending information, and turns constantly on if the device indicates an alarm.
The Fire Panel also registers the type of detector on the given address, so if the type of head is changed without it being reprogrammed, an alarm will sound.
- Saves the address on the sensor’s base.
- Sets the address on a plastic card (XPert).
- Provides its status using a two-colored LED.
- Smoke is detected via infrared.
- Transmits a constant communication.
Avisadores Manuales (pulsadores)
The manual stations series includes fire alarm initialization devices, UL approved, which can connect together with other multiplex devices by the expansion module.
They are usually installed near the exit zone of a building, like doors and leaders, allowing people evacuation when a fire alarm is activated.
SimplyVAV, Serie BAC-8000
The SimplyVAV series of controllers are an easy and unique approach to operating a wide variety of VAV terminal units. The integrated actuators, internal airflow sensors, and wide variety of application programs make these BACnet Application Specific controllers ideal for either new or retrofit installations.
Native BACnet. All models are BACnet Application Specific Controllers that are ready to connect to a BACnet MS/TP network. Device instance, MAC address, and baud rate are set from an STE-8001 without special software.
Easy system integration. For SimplyVAV installations that are part of a BACnet building automation system, the controllers provide system diagnostic indicators. Through the MS/TP network, the controllers signal demands for higher static duct pressure, cooler or warmer supply air, and when to start air handler units.
Router, modelo BAC-5050
The multi-port is a KMC FullBAC
router that works efficiently and reliably
in trafficking routes for BACnet
complex buildings today
features automation projects
consist of multiple networks.
The BAC-5050 provides
communication between
foreign devices, BACnet IP
LAN, the BACnet MS / TP
network controller, and
Ethernet 802.3 (ISO 8802-3)
network.
3 sub-networks RS485, for 127 BACnet controllers each
2 RS232 gates for direct connection to PC
1 Ethernet gate for LAN & PC networks
Supports 4 Ethernet sub-networks, each one w/independent programming as:
Ethernet 802.3 BACnet broadcast management device
(BBDM); Bacnet PAD (packet assembling/disassembling) routing
Register or third-part equipment w/ BBDM, (Ethernet 802.3 BACnet)
2 MB Flash memory
2MB RAM
Automatic RAM backup
BACnet Building Controller: modelo BAC-A1616BC
The BACnet Building Controller (B-BC) is a native BACnet direct digital controller for high performance. Works as part of a system of interoperable building automation, this B-BC 16 Ă— 16 offers precise control and control of connected points. Integrated into the controller is a BACnet router, web server, and expandable I / O (expansion module-A168EIO CAN) in a native BACnet device.
16 programmable inputs, digital – analog:
digital: 0/5 VCC (w/resistor) up to 1000 Hz analog: 0-5 VCC or 4-20 mA (w/resistor);12 bits
16 programmable outputs, digital – analog:
digital: 0/5 VCC analog: 0-10 VCC
16-128 standard control blocks P, PI, PID
32 Basic programming blocks (Require TotalControl) Communications: ethernet, RS-232,
2 sub-networks RS-485 for 127 BACnet addresses each
Direct connection to Internet (using a standard browser included into the controller)
Expansion to 7 CAN-168EIO modules – 16 inputs and 8 outputs
TotalControl
KMC Controls
The KMC system was designed on the basis of a flexible architecture, for which is easily adaptable to any kind of building. The basic architecture is formed by multiple programmable controllers and a Work Station, consisting of one standard PC with the KMC software, where the operator is able to monitor and control any point of the system in a tabular as in a graphical way. There is no need of informatics knowledge by the operator, because the operation of the terminal is very friendly, just to know the building would be enough.
TotalControl
This software offers Internet based services to manage one building automation system for small, medium and great ventures. The TotalControl is a flexible solution with multiple possibilities to develop the features that the automation system may require, independently from the systems’ complexity.
Components included Alarm management service, Trend logging service, Internet browser accessibility modules, Transfer values between controllers on dissimilar protocols with Protocol Gateway, an SQL database for centralized data storage, Internet Access with Internet Explorer or similar.
Controlador y Economizador para Habitaciones
Room Controller and Energy Saver
Air conditioning control
Lighting Control
Energy Saving
KMC Controls “Building your comfort zone”
The Power Saver is a device that controls the electrical energy in the room of a hotel, allowing significant savings and supporting green policies.
Sistemas de Seguridad
Fire Detection and Extinction
Sound
CCTV and Access Control
BOSCH “Innovation for life”
The intelligent smoke detector is the most effective way to detect a fire in its incipient stage. Its ability to detect a fire in its early stages allows to take action to control a fire, facilitate the evacuation and act on the extinguishing system. A smoke detector is the fastest way to fight a fire before it’s too late.
Cerraduras ElectrĂłnicas
Electronic Locks
Access Control
Timelox “Reliable and friendly products”
An efficient management of access system that adapts to the needs of your hotel, using proximity cards allows you to control the access of employees, guests or any related person, being possible to programme and audit through the management software anytime the access, timetables, levels of hierarchy, etc.. of each and every room of the hotel, thus avoiding theft, capital flight, or just to keep a more strict, detailed, and real time monitoring of the hotel; also greatly improves the image of modernity, control and security of the hotel, and giving peace of mind to its customers.
Cofres ElectrĂłnicos
Electronic Safes
Litetronic
With this security box you can have your valuable possessions safe, with a numeric panel with more than eight million possible combinations, the best in security for your hotel.
Ideal for placement in a wall of any of his dwelling.
AnemĂłmetros
The anemometer is a weather anemograph or device used for weather forecasting and , specifically , to measure wind speed. It is also one of the basic flight instruments flight heavier -than-air aircraft.
In meteorology , it is mainly used cup anemometers or reel kind of tiny windmill blades with three cups on which the wind acts ; the number of turns can be read directly on a counter or registered on a strip of paper ( anemogram ) , in which case the device is called anemograph . Although there are also electronic type .
To measure the sudden changes in wind speed , especially in the turbulence , is resorted to anemometer filament , consisting of a platinum or nickel electrically heated : wind action has the effect of cooling it and do so vary their resistance ; therefore, the current flowing through the wire is proportional to the wind speed.
Sensores de Nivel
It is an electronic device that measures the height of the material, usually liquid , in a tank or other container.
Integral control processes in many industries, level measurement sensors fall into two main types. Sensors measuring point level is used to mark a height of a liquid in a certain preset level . Generally, this type of sensor functions as an alarm , indicating an over filled when the particular level has been acquired, or the contrary, a low level alarm . Continuous level sensors are more sophisticated and can track the level of an entire system. These measure the fluid level within a specified range , rather than at a single point , producing an analog output that is directly correlated to the level in the vessel . To create a management system level , the output signal is related to a process control loop and a visual indicator.
ManĂłmetros y Trasmisores de PresiĂłn
Pressure gauges and transmitters for gauge or differential pressure, with or w/o digital display. Low cost and easy installation. Multiple applications, both industrial and in laboratories and clean rooms.
CaudalĂmetros
Flow control in the line, viewers for pipe flow rate, transmitters.
Soft-starters Santerno
This is the response for the soft start and stop of 220 to 15000 VAC motors.
Compact dimensions and prices
• 3 Adjustments: Initial start voltage, Start ramp time, Soft stop ramp time
• 6 Indications: No control power, Ready, Starter tripped, motor not running, Motor running at full speed, Motor starting or stopping
• 3 Alarms: Power circuit, Supply frequency, Communication failure
• 2 digital inputs: Start, Stop
• 1 Output relay: Main contactor relay
• Local reset
• Serial communication RS485; MODBUS RTU protocols
• Standard approvals: UL / CE
Variador de frecuencia Sinus Santerno
• One product, 3 functions:
– For general applications, vector modulation IFD software
– For heavy torque performance, sensorless vector control VTC software
– For specific lift applications, vector modulation LIFT software
• Integrated filters on the full range in compliance with EN61800-3 2nd ed. about RFI emission limits
• Input contactor not necessary (doc. IEC 22G/109/NP draft of IEC61800-5 Safety requirements)
• Reduced dimensions up to 50%
• Intelligent cooling system
• Integrated braking chopper up to S30
• accepts over load 200% max torque for 5 seconds
• PID regulator
• 8 programmable inputs; 4 programmable analog inputs 0-10Vdc, 0(4)-20mA
• Serial communication RS485 with MODBUS RTU protocol
Frigobares
Absorption Minibars
Touribar “Design & Quality”
Manage to offer the best service to its customers in a totally silent and efficient, with low power consumption for your hotel. Its comprehensive features and configuration options, ensure obtaining perfect for each hotel minibar.
ABSORPTION series, configurable as needed to service their customers. With fully customizable door
Panel de Control Monitor XL
As the basis for the Monitor XL security system, the XL Monitor Control Panel contains the complete user database, all system information and operates independently in non-volatile memory. The Prime base model supports 1,000 users, while the Enterprise model supports up to 4,000 users, or up to 64,000 with additional memory.
Each XL panel can be configured using either the Monitor XL LCD Keyboard module or the Director software. The LCD Keypad also functions as a complete configuration and diagnostic tool, allowing a technician to repair and configure the control panel without disconnecting the other modules.
Each XL panel includes 12 inputs and can be expanded to 256 by adding LCD keypads and expansion modules. As part of a 250-panel XL network system, the Software Director supports 64,000 inputs per database, adjustable using any of the 16 pre-configured or customizing 20 point formats. 16 diagnostic points enable system tests.
Software de seguridad integrada de alto rendimiento
Verex offers integrated intrusion, access control and video solutions designed to meet the highest market requirements.
Thanks to its versatile architecture, the Verex platform fits a wide range of applications, from commercial solutions requiring stability and low cost of ownership, to large-scale enterprise deployments where seamless growth and integration of security features play a role in their operations.
Using an intuitive graphical interface, the security devices of all the remote sites can be managed simultaneously, allowing a maximum optimization of the monitoring resources.
TruVision®
4, 8 or 16 channel DVR. Utilizes HD-TVI technology to offer high definition quality video through the standard analog cable.
The recorder accepts analog cameras and provides the necessary tools to the easy interchange to go from analog to IP systems.
Compatible with any combination of standard analog, HD-TVI analog or IP cameras IP.
Up to 8/16 high definition cameras in real time (30 fps).
Supports up to 1080p HD resolution.
8 or 16 channels of real time recording.
Control of PTZ cameras and domes through a mouse, frontal panel, IR remote control or keyboard with Interlogix’s commands.
HDMI output.
Grabadores de video en red
The Interlogix NVR TruVision® are network video recorders designed to support H.265 or H.264 video streams from encoders and IP cameras. With a total of 256/320 Mbps (16 or 32 channels) available input bandwidth, it can Support up to 32 cameras with real time (30 fps) high definition resolution and many other configurations.
The TruVision is a high-performance network video recorder. It has a total available bandwidth of 80/160 Mbps, the TVN 21 can connect to 8/16 IP cameras and support high definition recording (25/30ips) Full real time HD1080p in every channel simultaneously. Besides, with fully flexible bandwidth allocation, TVN 21 allows recording resolutions of 6 MPX in several speeds.
TruVision tipo Box 700TVL
With a resolution of 700TVL and sensibility of 0,001 lux, it offers a high-performance analog and competitive cost solution.
Equipped with Digital Noise Reduction (DNR) capabilities, the TruVision box camera provides excellent video quality even under variable and harsh light conditions. Its Adaptive Tone Reproduction (ATR) reveals details under wide dynamic range conditions, while Highlight Compensation (HLC) technology suppresses intense situations such as bright vehicle headlights
Minidomo C/IR TruVision
ONVIF. H.264 Comprehensive Technology with dual transmission capacity. 2,8 mm 2,8 ~ 12 mm varifocal lens. IP66 protection, antivandalism IK10. TruVision cameras use H.264 comprehension with dual video stream, making easy to manage bandwidth utilized by the cameras. These cameras were designed to join the open communication standards PSIA and ONVIF and also Support some CGI commands for the simple integration into any IP system.
Cámara IR tipo Bullet TruVision
Compatibility of open communication standards ONVIF Profile G and S. WDR and / or real-time video streaming
Protection IP66. TruVision ™ Analog or IP Cameras offer cost-effective surveillance with high-resolution video and multiple functions for a variety of applications. Using the latest CCD and DSP technology, the cameras offer high resolution for exceptional performance.
Controladores de Puertas
XL Monitor Door Controllers allow full access control functionality that is easily scalable and highly configurable. Each door controller provides complete control of both two- and four-door reader (Input / Output) applications. A local database of the standby user on each controller provides access to the designated personnel in case of a communication problem.
Supports Wiegand, Magnetic Stripe and Proximity readers.
Lectoras
Proximity readers combined with keyboard, compatible with leading smart card technologies. They adapt to specific needs, have the flexibility to improve the security system in an economical and viable way.
Models with Wiegand output are compatible with all control systems that use communications based on Wiegand data from 26 to 176 bits. This includes support for the CASI, InfoGraphics, EST, and iDenticard product lines.
They incorporate advanced electronics and circuitry and are sealed to ensure protection against environmental hazards. Powerful electronics for superior reading range with any technology, they also meet low consumption requirements and can be powered from 6 to 16 Vdc.
Cámaras Domo 360
Viewing Angle 360°. Multiple display modes. IR range up to 10m. 360 degree cameras allow a much wider view than conventional cameras. It shows in a single image in 360º all the space of the room. Available in 3 and 6 MPx versions.
Cámaras PTZ
The TruVision® PTZ camera uses the latest PTZ technology with advanced features such as real day / night surveillance and Wide Dynamic Range imaging, delivering optimal image quality in a variety of indoor or outdoor environments. The motion detection and electronic image stabilization functionality provides additional value to any surveillance system.
The camera’s high resolution and optical zoom work together to offer clear, sharp images even from a distance. This is complemented by a 360 ° endless pan / tilt, with speeds up to 400 ° / sec for full motion and tracking across all fields of view.
Sirenas
Electronic Horns: indoor, outdoor, strobes, mixed, speakers.
The fire alarm siren is designed for use on the exterior of buildings, in order to
warn the outsiders detection of a home fire by the detection system and
fire alarm in the building. To this end, combines an acoustic signal and an indication
intermittent light. For its activation is only required to supply this voltage.
The fire siren is suitable for outdoor use. If you intend to use in an area
closed, it must be remembered that this siren sound intensity could be higher than
auditory discomfort threshold.
Sistema de detecciĂłn por aspiraciĂłn FAAST
FAAST Smoke suction detectors have a fire detection with very early warning, highly accurate and wide communication capabilities to give maximum control into complex or critical environments.
– Detection as precise as 0.00046 %/ft obscuration.
– Multi-alarm levels and two sensitivity modes provide programming flexibility.
– Dual flow detection including both ultrasonic and electronic sensing for pipe and chamber air flow measurement provides early notification of pipe network trouble conditions.
– Advanced detection algorithms reject common nuisance conditions.
– Patented particle separator and field-replaceable filter remove contaminants from the system reduces maintenance in even the harshest environments.
– The PipeIQ ™ program provides intuitive system design, configuration and monitoring, all in one.